Say desinyo na platen ya pinabiskeg ed sentro, matukoy parad saray hulma ya mankaukolan na atagey a biskeg na sentro a singa saray balde na pintura. Say yunit na panag-ipit et mas malet tan maples, walaan na maong a inkapekder tan andukey a bilay na tie bar.
Say espisyal ya desinyo na tornilyo et mamaaligwas ed kapasidad na panag-plastic tan panag-charge, mamapatikey ed panaon na produksyon. Say maples ya panagkarga na motor et mamaaligwas ed kapeles na panagkarga.
Manggawa na doble ya indaak na servo motor system, ya estandarte ya walay eject on fly, pian napaaligwas so produksyon. (Likud ed HMD430M8-SII)
Say panagbunog na danum ya pampalamig et walay 15+1φ12 ya maples ya saksakan. Mangusar na infrared heating band, maong ya epekto na preserbasyon na petang, 30% ya makatipid na enerhiya nen say ordinaryon heating band.
Solusyon na Paint Bucket
| PARAMETER | YUNIT | HMD430M8-SII | HMD500M8-SII |
| internasyonal ya rating na kabaleg | -- | 2859/430 | 3165/500 |
| INJECTION UNIT | |||
| Say karakel na ineksion (teorya) | cm3 | 1809 | 2042 |
| belat na ineksion (PS) | g | 1646 | 1858 |
| oz | 58.1 | 65.6 | |
| Rate na ineksion | g/s | 591 | 680 |
| Diametro na tornilyo | mm | 80 | 85 |
| presyon na ineksion | MPa | 158 | 155 |
| L/D ratio na tornilyo | -- | 22.5:1 | 22.7:1 |
| Screw stroke | mm | 360 | |
| Kapeles na tornilyo (anggapoy kundang) | r/min | 0-173 | 0-165 |
| CLAMPING UNIT | |||
| Puersa na panag-ipit | kN | 4300 | 5000 |
| Mold Opening stroke | mm | 730 | 810 |
| Say kabaleg na platen | mm×mm | 1032×1042 | 1128×1168 |
| Dist.between tie bars(H×V) | mm×mm | 760×730 | 830×830 |
| Max.liwawa na agew | mm | 1460 | 1630 |
| Kapal na hulma (Min-Max) | mm | 250-730 | 300-820 |
| Ejector stroke | mm | 185 | 210 |
| Ejector tonnage | kN | 111 | 111 |
| POWER UNIT | |||
| Say presyon na sistema na hydraulic | MPa | 17.5 | 17.5 |
| Pump motor power | kW | 72 | 48+31 |
| Say pakayari na pampainit | kW | 47.8 | 51.6 |
| Bilang na temp control zones | -- | 6 | 6 |
| ARAM | |||
| Kapasidad na tangke na langis | L | 500 | 590 |
| Sukat na makina (L×W×H) | m×m×m | 8.0×2.0×2.6 | 8.3×2.1×2.6 |
| Say belat na makina | Ton | 18 | 22 |
Saray Mainit ya Tag: balde injection molding machine, China balde injection molding machine manufacturers, suppliers, pabrika
