ESPESIPIKASYON
| PARAMETER | YUNIT | HMD130M8-IIP | |||
| internasyonal ya rating na kabaleg | -- | 445/130 | |||
| INJECTION UNIT | A | B | C | D | |
| Say karakel na ineksion (teorya) | cm3 | 193 | 215 | 263 | 316 |
| belat na ineksion (PS) | g | 176 | 196 | 239 | 287 |
| oz | 6.2 | 6.9 | 8.4 | 10.1 | |
| Rate na ineksion | g/s | 160 | 178 | 217 | 261 |
| Diametro na tornilyo | mm | 36 | 38 | 42 | 46 |
| presyon na ineksion | MPa | 230 | 207 | 169 | 141 |
| L/D ratio na tornilyo | -- | 23.5:1 | 22:1 | 20:1 | 18:1 |
| Screw stroke | mm | 190 | |||
| Kapeles na tornilyo (anggapoy kundang) | r/min | 0-300 | |||
| CLAMPING UNIT | |||||
| Puersa na panag-ipit | kN | 1300 | |||
| Mold Opening stroke | mm | 380 | |||
| Say kabaleg na platen | mm×mm | 630×610 | |||
| Dist.between tie bars(H×V) | mm×mm | 425×405 | |||
| Max.liwawa na agew | mm | 840 | |||
| Kapal na hulma (Min-Max) | mm | 150-460 | |||
| Ejector stroke | mm | 125 | |||
| Ejector tonnage | kN | 42 | |||
| POWER UNIT | |||||
| Say presyon na sistema na hydraulic | MPa | 17.5 | |||
| Pump motor power | kW | 31.3 | |||
| Say pakayari na pampainit | kW | 11 | |||
| Bilang na temp control zones | -- | 4 | |||
| ARAM | |||||
| Kapasidad na tangke na langis | L | 135 | |||
| Sukat na makina (L×W×H) | m×m×m | 4.5×1.4×1.9 | |||
| Say belat na makina | Ton | 4 | |||
INJECTION UNIT
Maples ya panag-ineksion
Paaligwasen so hydraulic controlsystem, palaknaben so kapeles na injection pian napatikeyan so panaon na sirkulo, lalo la ed saray manipis ya padir ya produkto.
Say desinyo na abeban frication
Say injection unit et angusar na linearguide, pian nabawasan so friction tan napalaknab so peles legan na injection.
Doble ya ineksion so silindro
I-adapt so bi-direction piston rod parad injection cylinder, pabalegen so bilay na oilseal, mas malet so injection.
Tornilyo&Bariles
Standard ya walay infrared heating bands, mamaaligwas ed kapasidad na panagplastik.
CLAMPING UNIT
Pabiskegen platen
Pinaaligwas ya platen ya walay atagey ya rigidity structure to, lalo la no matukoy ed manipis iran padir ya produkto.
Tie bar
Walay ally metallic tie bar ya walay biskeg to pian napalaknab so bilay.
HYDRAULIC UNIT
Hydraulic system
Paaligwasen so hydraulic control system, mas maples tan mas epektibo so makina, mas antikey so panaon na produksyon. Standard ya walay clamping proportional valve, maples ya ebat tan precision control.
Hydraulic motor
Mapeles ya hydraulic motor.
YUNIT NA KURYENTE
Controller
I-adapt so Italy INOVA computer, ya walay 10inch ya kolor ya LED screen, naimano so inkasusto tan maples ya reaksion.
Elemento na kuryente
Say kontraktor tan limitadon switch so mangibagay Omron tan Schneider.
Saray Mainit ya Tag: medikal a plastik a panagmoldi, China medikal a panagmoldi na managgaway, supplier, pabrika
