ESPESIPIKASYON
| PARAMETER | YUNIT | HMD90M8-SII | ||
| internasyonal ya rating na kabaleg | -- | 282/90 | ||
| INJECTION UNIT | A | B | C | |
| Say karakel na ineksion (teorya) | cm3 | 129 | 163 | 201 |
| belat na ineksion (PS) | g | 117 | 148 | 183 |
| oz | 4.1 | 5.2 | 6.5 | |
| Rate na ineksion | g/s | 98 | 123 | 152 |
| Diametro na tornilyo | mm | 32 | 36 | 40 |
| presyon na ineksion | MPa | 219 | 173 | 140 |
| L/D ratio na tornilyo | -- | 22:1 | 19.6:1 | 17.6:1 |
| Screw stroke | mm | 160 | ||
| Kapeles na tornilyo (anggapoy kundang) | r/min | 0-300 | ||
| CLAMPING UNIT | ||||
| Puersa na panag-ipit | kN | 900 | ||
| Mold Opening stroke | mm | 320 | ||
| Say kabaleg na platen | mm×mm | 535×535 | ||
| Say espasyo ed baetan na saray tie bar | mm×mm | 360×360 | ||
| Max.liwawa na agew | mm | 680 | ||
| Kapal na hulma (Min-Max) | mm | 150-360 | ||
| Hydraulic ejection stroke | mm | 100 | ||
| Puersa na hydraulic ejection | kN | 31 | ||
| POWER UNIT | ||||
| Say presyon na sistema na hydraulic | MPa | 16 | ||
| Pump motor power | kW | 18.7 | ||
| Say pakayari na pampainit | kW | 8.6 | ||
| Bilang na temp control zones | -- | 4 | ||
| ARAM | ||||
| Kapasidad na tangke na langis | L | 125 | ||
| Sukat na makina (L×W×H) | m×m×m | 4.0×1.21.9 | ||
| Say belat na makina | Ton | 3.5 | ||
PANAG-CLAMP YUNIT
Makintab tan Maples ya Igalaw, Atagey so Malet ya Platen, Mas Andukey so Bilay na Tie Bar.
Say pegley a parte et mamabiskeg ed desinyo na clamping unit tan mamaaligwas ed tie bar, kayari na finite element analysis tan optimization, say clamping mechanism et walaan na bentaha na maabig tan maples ya galaw, maong ya rigidity platen tan andukey ya bilay na tie bar.
Standard ya walay T-slot, mainomay ya i-mold ed mold. Say hydraulic motor so mamaandar ed automatikon mold adjustment device, malet, maples tan epektibo, tan makatipid na panaon na pangimount ed mold.
INJECTION UNIT
Pinaabig ya Desinyo na Tornilyo tan Baril, ya Mas Maong so Abilidad tan Performance na Panagplastik.
Doble-silindro na sistema na panag-ineksion tan doble silindro na karwahe, pian naseguro ya malet tan maabig so galaw na panag-ineksion.
Walay desinyo na guide liner, ya abeba so resistensya to. Mas maples so pangi-ineksion tan pangi-charge na back pressure, ya atagey so inkasusto na pangi-ineksion.
I-optimize so desinyo na tornilyo tan bariles, ya mas mabiskeg so pakayari ton man-plasticize tan mas maong so performance na plasticizing, pian nasumpal so nanduruman klase na espisyal iran produkto. Saray manunan kabiangan a singa say injection piston rod, injection driving platen tan coupler et pinabiskeg pian nabawasan so posibilidad ya nabali so piston rod.
HYDRAULIC UNIT
Atagey a Kasusto,Enerhiya-Makatipid,Maples-Ebat
I-sync so servo motor tan driver, ya walay digital dose loop control, makatipid na enerhiya tan epektibo, maples ya ebat tan eksakton kontrol, mas malet ed abeban situasyon na agos.
Mas marakep so desinyo na pakayari na motor, mas maples tan mas epektibo so makina, mas antikey so panaon na produksyon, mas epektibo so produksyon.
YUNIT NA KURYENTE
Say estandarte ya walay safety relay, safety hydraulic valve tan metal cover protection et adesinyo unong ed GB2530 national safety standards, ya inyarum so thermal master switch protection tan five-hole plug protection pian napaaligwas so safety performance na interon makina. Saray manunan kabiangan et saray imported ya tatak a singa say Schneder, ABB, OMRON tan arum nira.
Say serye et walaan na high-performance controller, baleg ya LCD display tan simplin friendly operational interface.
Saray Mainit ya Tag: servo motor parad injection molding machine, China servo motor parad injection molding machine manufacturers, suppliers, pabrika
